测试时间测试时间再次让我们看看这件事会如何进行。
Test time test time once again let's see how this thing's going to play out.

我将继续让我们进入运行模式，我们会在这里得到一些警报模拟。
I'm going to go ahead and slam us into run mode and we'll get some alarmed simulated here.

截至目前，它说我们已经收到了非常好的警报。
As of right now it says we've got alarms that's pretty good.

它说我们有一个水箱液位低和一个水箱液位高警报，这是我之前测试指示器时的情况。
And it says we've got a tank level low and a tank level high alarm and that was from before when I was testing my indicator.

让我们继续看看我们能否摆脱这些沉默，然后它们就消失了。
Let's go ahead and see if we can get rid of those silence and they're gone.

我想重置这些警报并摆脱它们，然后我将确认这两个警报，以便它们从我的列表中消失。
I want to reset those alarms and get rid of them and then I'm going to just acknowledge both of these so that they disappear from my list.

好的。
All right.

这已经是一个非常好的迹象，因为它告诉我这东西正在发挥作用。
That's already a really good sign because it tells me that this thing is working.

让我们进入欢迎屏幕，我还将模拟低流量警报。
And let's go into our welcome's screen and I'm going to also simulate a low flow alarm.

那么让我们进入模拟阶段。
So let's come into simulation.

滚动滚动向下滚动到这里，就在这里我遇到了流量低的原因。
Scroll scroll scroll down here and right here I've got a cause low flow.

因此，我将切换该位以引发低流量警报。
So I'm going to toggle that bit to cause a low flow alarm.

进行审查，看看我们的坦克处于什么位置。
Go into review and see where we're at on our tank.

所以现在我们被关闭了。
So right now we are shut down.

我们不动。
We're not moving.

当我们开始移动时，我想继续前进并确保我们已经填满。
And when we start moving I want to go ahead and make sure that we are filling.

那么让我们回到 Cym。
So let's go back into Cym.

向上滚动，我想继续将水箱液位设置为大约三千五百。
Scroll back up and I want to go ahead and set that tank level to something like thirty five hundred.

这应该会导致我们失败。
That should cause us to fail.

现在让我们让系统重新运行。
And now let's put our system back in to run.

所以我要回到我们的应用程序，我们没有运行，并说我们收到了警报，所以也许我们已经得到了低流量。
So I'm going to come back into our app and we're not running and says we've got an alarm so maybe we already got that low flow.

果然我们的流量很低。
Sure enough we got our low flow.

好的，很好。
OK that's good.

我们可以重置它。
And we can reset that.

在这一点上，我想说我们已经有了一个完全正常工作的警报管理系统，它将在我们的每个屏幕上通知我们。
And at this point I would say we've got a fully working alarm management system and it's going to notify us on every one of our screens.

让我们继续，让自己回到运行模式。
Let's go ahead and put ourselves back into run mode.

我们正在奔跑。
We're running.

然后我会给自己再发出一个低水位警报。
And then I'm going to give ourselves one more low tank level alarm.

因此，让我们继续将其设置为零。
So let's go ahead and set this down to zero.

当我们眨眼的时候，它就会弹出。
And that's going to pop up with our blink.

就在那里。
There it is.

让我们检查并确保它出现在我们所有的屏幕上。
And let's just check and make sure that's on all of our screens.

所以这是关于安全的。
So it's on security.

它采用 HBO 的运行时配置方式。
It's on HBO way it's on runtime configuration.

它在她的概览屏幕上，甚至在我们的闹钟屏幕上。
It's on her overview screen and it's even on our alarm's screen.

这样就测试成功了。
That's it successful test.

我想说我们很好，我们会在下一个讲座中回来并进入下一个项目。
And I would say we are good and we'll come back in the next lecture and jump into the next project.

那我就见到你了。
So I see you then.

干杯
Cheers